One-dimensional Transient Hygrothermal Analysis
One-dimensional Transient Hygrothermal Analysis. Would there be a water damage inside, at the absence of any rain intrusion or plumbing leaks? Microbial growth? We found the answer in many cases is yes.
These analysis are performed in design stages, in order to assess the moisture behavior of very simple assemblies. Most typically performed to assess the need and location of vapor retarding layers.
We also perform a long-term hygrothermal monitoring of assemblies in the field, in order to identify sources of moisture damage after the possibility of leakage has been ruled out.
You may also be interested in reading the following technical publication:
Condensation Risk Assessment (PDF, size 3 MB) by Mr. Karol Kazmierczak – The Construction Specifier 10/2007
3D Thermal Modeling
Thermal Engineering in Building Envelope Design
Condensation Risk Assessment
Facade Access
Facade Engineering. How To Design a Functional Building Enclosure
Facade Impact Resistance Manual
Foggy Glass Disease
How To Write and Read a Forensic Report
In Support of Glazed Curtain Walls
Movements and Tolerances
Review of Curtain Walls, Focusing on Design Problems and Solutions
Transitions: How to Design Facade Interfaces
When You Need A Window – Solar Design
Curtain walls
Façade Engineering With Glass
Hot and Humid Climate and Hurricane considerations in Building Enclosure Design
Principles of Facade Design
Sloped glazing
Storefronts
December 25th, 2012 at 6:57 pm
[…] WUFI Hygrothermal Analysis […]