It’s not always rain leakage, we find in our investigations as facade doctors. We sometimes find no traces of water intrusion, as opposed to water condensing inside, where it can damage moisture-sensitive materials, and contribute to microbial growth i.e. mold and mildew. In such a case,
Entries Tagged ‘FEA 3D’
One of the chief reasons of weatherproofing failures of facades is the thermal stresses and associated movements in excess of seals’ elastic capacity. This is particularly true for metal curtain walls, because of
We assist designers in verification of performance of bespoke components and assemblies via computerized finite element analysis (FEA): thermal, hygrothermal, optical, solar, static, and dynamic. Many of these state-of-the-art computer generated analysis are unique worldwide. E.g., we are recognized as a world-class leader in the field of 3-dimensional computer simulations. Download the printable scope of […]
Performed for verification of stresses in the material or assembly.
What is computational fluid dynamics? These simulations are performed as a virtual wind tunnel analysis (e.g. for shape optimization or tracing wind-borne projectiles) or for identification of boundary conditions for thermal analysis.
One-dimensional Transient Hygrothermal Analysis. Would there be a water damage inside, at the absence of any rain intrusion or plumbing leaks? Microbial growth? We found the answer in many cases is yes. These analysis are performed in design stages, in order to assess the moisture behavior of very simple assemblies. Most typically performed to assess […]
What kind of shade would you prefer to have over your head in the oppressively hot and sunny South Florida? Many people choose their umbrellas (at the absence of rain). Solar energy may not be enough to run my photo voltaic system, but it is powerful enough to cause serious sunburns. Playing with aesthetics of miscellaneous facade expressions, you […]
What did you first notice on this photograph? If you are a sad individual like me, you noticed the condensation on the glass, which obstructs the view of the yellow wings and the black belly of the tit outside. This photo shows two environments inhabited by the tropical bird one one side, and the winter […]
3D Static Structural Engineering Simulations are performed for verification of stresses in the material or assembly. Below is an example of an exaggerated deflection of the curtain wall mullion receiving reaction from the roof above. Using 3D Thermal Modeling to Improve Performance Requirements by Mr. Karol Kazmierczak – JBED 2/2010
Would there be a water damage inside, at the absence of any rain intrusion or plumbing leaks? Microbial growth? We found the answer in many cases is yes. These hygro-thermal analyses are performed on facades of buildings in design stages, in order to assess the moisture behavior of very simple assemblies. Most typically performed to assess the […]
2-Dimensional Steady State Thermal Analysis is performed on simple assemblies to identify the thermal transmittance (U value) and assess the condensation risk. What is the thermal transmittance? It’s composed of the three modes of heat transfer: thermal heat conductivity, thermal heat conductivity, and radiation thermal. It’s often expressed as U values (for windows, curtain walls, skylights, and other […]
Whole Building Energy Modeling is the energy analysis to estimate the building energy use. It’s often performed for the comparative analysis of design trade-offs to meet the predefined energy goals. Also, it’s an important part of the energy rating process, particularly when combined with the air tightness verification in the field. Required by many energy conservation building codes for energy […]
How much energy can you save by adding exterior shading? What would be the return on investment on a better window? How about adding a shaded patio? Wouldn’t it get too dark inside? The only way to find out is to simulate these alternatives ahead of time, because the same component would perform differently in […]
Would it be too dark in the working spaces? Would prison guards be blinded by glare from windows precisely when inmates are out? We never loose the primary function of glazing from sight: letting the natural light in.We perform daylight simulations and illumination studies to verify the daylight factor. Particularly useful in verification of compliance […]
Glass is seldom matched properly, as seen on the photos below, and therefore owners often require a blanket glass replacement, after only few pieces have been broken or scratched. Save hundreds of thousands of dollars which would otherwise be spent on replacement of the intact old glass not matching the new replacement glass.
3-Dimensional Transient Thermal Analysis are performed to assess the passive solar design with materials of large heat storage capacity or to assess the condensation risk. Useful in analysis of 3D assemblies made of high-heat storage capacity materials, such as masonry and concrete precast. Would they store and release enough heat to ride through the cold […]
3-Dimensional Steady State Thermal Analysis are performed chiefly to assess the condensation risk of those details that escape the 2D representation, such as shading brackets, anchors, and framing intersections in verification of impact of thermal bridging caused by components penetrating the heat-control layer in two directions. The image above shows the Sample 3-Dimensional Steady State Thermal […]
Consulting architects, I often get surprising elementary questions. Building architecture design of glass houses resulted in careers for consulting engineers occupied full-time by 3-d modeling heat transfer, while some facade architects still ask why double glazed windows or doors are required by building codes. Here are some frequently-asked questions:
This article is about building construction, and more specifically about application of the finite element analysis to heat transfer and energy sources design analysis of glazing by a consulting architect engineer. The growing performance requirements introduced gradually in building codes or accepted voluntarily in order to achieve a recognized certification (e.g. LEED) force architects to include […]
We are sometimes asked to simulate or test assemblies, in order to verify whether the inferior specifications are met. It’s always awkward for us to volunteer to identify the engineering question actually worth answering, or to actually respond to the question no-one have asked. For the benefit of those specification writers who are still on speaking terms […]